A rate for every day, with a reason attached
Roomrise AI Pricing suggests a rate for each day, based on your own property's data. You read the reason, then decide to apply it or skip it.
Rates and demand
Which nights Roomrise suggests repricing, and what demand looks like
On a night the street is busy, rooms cost more. Roomrise reads that exact signal before it suggests a number.
From your own data to a number you can push back on
Eight steps, in the exact order they run. The last step feeds back into the first with real results.
Reads your own property's data
There is no industry template applied to every property. The input is your own real operating history.
Current rate
VND 4,248,000
Roomrise analyzes and suggests. You decide. Illustrative data.
Reads your own property's data
There is no industry template applied to every property. The input is your own real operating history.
- Booking history
- Occupancy pattern
- Channel mix
- Rates on display
Estimates demand for each night ahead
Split by room type, because a weekend night for a double room and a family room are not the same story.
- Forecast unit
- Split by
- Horizon
The model grades itself on the past first
It reruns on past data, then checks the result against what actually happened. Nothing gets to say anything about the future before passing this step.
- Checked against
- Method
- Before applying
One night's rate pulls on the night next to it
Optimizing each day in isolation is a sure way to break up a three-night stay. The whole range is calculated together.
- The whole date range is calculated in one pass, not day by separate day.
- It accounts for how sensitive demand is to price, so the suggestion never jumps unreasonably.
- Raising one night does not break the night next to it within the same stay.
Blocked before a suggestion ever appears
A suggestion that breaks a guardrail never reaches your screen. Guardrails sit in front of the screen, not behind it.
- Rate ceiling and floor
- Change per step
- Unusual signals
No black box
A number you cannot explain is a number you cannot use. Every suggestion carries a reason you can read.
- Why this rate, and not another one.
- Which signal is pushing it up, which one is pulling it down.
- You can look back at past decisions and their reasons, even after they were applied.
AI suggests, you click apply
By default, nothing applies on its own. Automation has to be turned on, one task at a time, not all at once.
- Apply one day at a time, or apply the whole range in bulk.
- Skipping a suggestion does not require a reason.
- Automatic mode is turned on task by task, not with a single switch.
Real results feed back to step one
After a rate is applied, what actually happens is measured and traced back to the exact decision that caused it. The loop closes here.
- Measure
- Trace to
- Feeds
One price suggestion, from the system's proposal to the channels
Roomrise suggests, the manager approves and applies, and the new price goes out to the channels. This is what the price decision screen really shows. Choose a step below to stop on it.
A price suggestion goes from Pending approval to Synced with two clicks from the operator
Illustrated with demo data. The cursor is only a drawing; the steps below are clickable.
What it does
A suggestion for every day
Each day gets its own suggested rate, not one multiplier applied to the whole month.
A reason with every suggestion
Each suggestion states which signal it is based on, so you can check it before you apply it.
You keep the final say
By default, AI only suggests. Automatic application has to be turned on, and it is turned on one level at a time.
One task at a time, with nothing new to learn
Pick a capability to see the exact screen behind it.
A rate calendar, day by day
The rate calendar runs across every day of the month. Each cell shows the rate you are selling at next to the suggested rate, and any cell not yet approved stays pending.
- Two lines, two different things
- One line is the suggested rate change, the other is forecast occupancy.
- Dots on the suggestion line
- Each dot is a night with a suggestion waiting for your approval.
- Percentage axis
- 0 means keep the rate, above means raise it, below means lower it.
Rates and demand
Which nights Roomrise suggests repricing, and what demand looks like
The system produces a number with a reason attached. The decision still belongs to the person sitting here.
Step by step
- 01
Roomrise reads your own property's operating data.
No generic template applied to every property.
- 02
The system suggests a rate for each day, with a reason.
Each suggestion stands on its own day, not as one multiplier.
- 03
You open the day you want, read the reason, then apply it or skip it.
Nothing applies on its own before you confirm it.
- 04
Turn on automation one level at a time.
You are not required to turn everything on at once.
What Roomrise doesn't do yet
Stated right on the capability page, not buried in an internal document.
AI does not change your rates until you turn it on. The default is a suggestion that you apply yourself.
Suggestion quality depends on how much operating data has built up.
Clear answers before you start
The questions we hear most, including what Roomrise doesn't do yet.
What is Roomrise AI Pricing?
Will AI Pricing give good suggestions from day one?
Will AI change my prices on its own?
Read this before you book a demo
A few pages that answer most questions before you talk to us.
OverviewWhat Roomrise does
Every product capability on one page, from bookings to reports.
Read more- Channels
What each channel syncs
Which channels carry guest messages and which carry only the calendar and rates. Listed channel by channel.
Read more - Pricing
How the price scales
The formula by number of active units or rooms, so you can work out your fee before you contact us.
Read more - FAQ
Frequently asked questions
Including what Roomrise doesn't do yet, said plainly.
Read more
See Roomrise run on your property.
20 minutes with a person from our team. Tell us how you operate today, and we open the matching screens.